|
|
|
|
|
Ph.D: Mechanical Engineering, Drexel University, 1986 Manufacturing Issues in the Precision Forming of Automotive Parts; Manufacturing Engineering; Introduction to Manufacturing Processes; Manufacturing Processes and Simulation; Introduction to Metal Forming; Advanced Metal Forming for Production; Failure of Tools and Dies in Net Shape Forming; Advanced Methods in Process Modeling; Manufacturing Issues in the Precision Forming of Automotive Parts
UNIVERSITY COLLABORATORS
Consortium for Advancement of Rolling Technology ($135,000, Various Industries, 1997-99) Precision Forging Consortium ($40,000, NCMS/ Department of Energy, 1997-98) A Research Program to Evaluate and Optimize Physical Vapor Deposition Coatings for Wear Resistance Applications in Die Casting Dies ($75,000, Multi-Arc Inc., 1996-98) Roll Pass Design including Microstructural Evolution ($34,500, The Timken Company, 1996- 98) Evaluation of Chromium Carbide and other CVD Coatings to improve the Wear Resistance of Aluminum Die Casting Dies ($41,400, Center for Die Casting, Department of Energy, 1995- 97) Development of An Advanced Analysis Tool for Characterization, Simulation and Remedy of Molding Induced Defects in Liquid Composite Molding ($458,529, Co-PIs Jim Lee, R.S. Brodkey, M. Mittal, National Science Foundation, 1995-9) Investigate the Application of Neural Networks to Process Sequence Design in Cold Forging ($ 38,000), Co-Pi Prof. DeLiang Wang, Vice President of Research, OSU, 1994-1996) Investigate the Reduction of Dimensional Variability in the Extruded Product by Computer Modeling and Controlled Experiments ($115,004, Plymouth Tube Company, Hopkinsville, KY, 1994- 98) Practice Oriented Masters Program (POMEP) ( $72,000, Awarded support for four masters students ) Fluid Flow, Heat Transfer and Solidification in a Multi-Pin Die Casting Die to Investigate the Wear Characteristics of the Cavity Surfaces (200 resource units on Supercomputer YMP, Ohio Supercomputer Center, 1993- present) Effect of Voids on the Mechanical Properties of Polymer Composites (400 resource units on Supercomputer YMP, Ohio Supercomputer Center, 1995- present) Shivpuri, R. and Damodaran, D., " Effect of Glass Lubricant Behavior on the Surface Quality of Extrudates in Glass Lubricated Hot Extrusion," Accepted for publication in CIRP Annals, Vol 46/1, 1997. Esche, S. K., and Shivpuri, R., " A Consistent Criterion for Diffuse Necking in Sheet Metals Using Hills 1979 Yield Surface," submitted to transactions of the ASME, Journal of Engineering Materials and Technology, 1997. Damodaran, D. and Shivpuri, R., " A Simple Numerical Model for Real Time Determination of Temperatures and Pressures during Glass Lubricated Hot Extrusion," Accepted for publication in the Transactions of the Society of Manufacturing Engineers, NAMRC XXV, 1997. Damodaran, D. and Shivpuri, R., "The Application of Sensitivity Analysis and Robust Design Concepts to Titanium Alloy Extrusion," Accepted for publication in the Transactions of the Society of Manufacturing Engineers, NAMRC XXV, 1997. Pauskar, P., Shivpuri, R., Cho, H. and Kim, N.," An FEM Based Model of Metal Flow and Microstructure Evolution in Continuous Hot Rolling," Accepted for publication in the Transactions of the Society of Manufacturing Engineers, NAMRC XXV, 1997 |
